MSI MS9297 User Guide - Page 51
BIOS Password Jumper: JPASSWORD1, RAID Select Jumper: JRAID_SEL1
View all MSI MS9297 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
MS-9297 BIOS Password Jumper: JPASSWORD1 The jumper is used to clear the BIOS password. You can clear BIOS password byshorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid clearing the password while the system is on; it will damage the mainboard. 1 JPASSWORD1 1 Normal (default) 1 Password clear RAID Select Jumper: JRAID_SEL1 This jumper specifies the RAID solution. 1 JRAID_SEL1 1 Normal (default) 1 Software RAID 3-15
3-15
MS-9297
BIOS Password Jumper: JPASSWORD1
The jumper ±s used to clear the BIOS password. You can clear BIOS password
byshort±ng 2-3 p±n wh±le the system ±s off. Then return to 1-2 p±n pos±t±on. Avo±d
clear±ng the password wh±le the system ±s on; ±t w±ll damage the ma±nboard.
RAID Select Jumper: JRAID_SEL1
This jumper specifies the RAID solution.
Normal (default)
1
Password clear
1
JPASSWORD1
1
Normal (default)
1
Software RAID
1
JRAID_SEL1
1