MSI NF750 User Guide - Page 96
Enter. - review
View all MSI NF750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
▍ NVIDIA RAID Completing the RAID BIOS Setup 1. After assigning your RAID array disks, press F7. The Clear disk data / Clear MBR prompt appears. 2. Press Y to clear the disk data / MBR. The Array List screen appears, where you can review the RAID arrays that you have set up. 3. Use the arrow keys to select the array that you want to set up, then press Enter. The Array Detail window appears. 4. The Array Detail screen shows various information about the array that you selected, such as Stripe Block, RAID Mode, Stripe Width, Disk Model Name, and disk capacity. 5. Press Enter again to go back to the previous window and then press F10 to exit the RAID setup. Now that the RAID setup has been configured from the RAID BIOS, the next step is to configure and load NVRAID drivers under Windows, as explained in "Installing the NVIDIA MediaShield Software Under Windows" on p.B-8. B-6