MSI Optix MAG240CR User Manual - Page 22

1st Level Menu 2nd/3rd Level Menu Description Anti Motion Blur (OFF) (ON) ■■ When Anti Motion Blur is enabled, HDCR and Brightness cannot be enabled and will be grayed out. ■■ Response time will be grayed out while Anti Motion Blur is enabled. ■■ Anti Motion Blur have to set to OFF while FreeSync is set to ON. Zero Latency (OFF) (ON) ■■ Users can adjust this item in any mode , any input source , any resolution and any screen refresh rate. ■■ While FreeSync is enabled, Zero Latency have to set to ON. Refresh Rate Location Left Top ■■ Users can adjust Refresh Rate in any Mode. OFF ON Right Top ■■ Default Refresh Rate Location is Left Top. Left Bottom Right Bottom Location is adjustable in OSD Menu. Press the Middle Button to confirm and apply your Refresh Rate Location. Customize ■■ This monitor follows and works at the Operating System's preset Screen Refresh Rate. Alarm Clock Location Left Top ■■ Users can adjust Alarm Clock in any Mode. Right Top ■■ After setting the time, press the Middle Left Bottom Button to activate the timer. 2-6 Right Bottom ■■ Default Alarm Clock Location is Left Top. Users can select their own location. Customize OFF 15:00 00:01~99:59 30:00 45:00 60:00 Screen Assistance None Icon ■■ Users can adjust Screen Assistance in any Mode. ■■ Screen Assistance default is None. Position Reset FreeSync (OFF) (ON) ■■ FreeSync prevents screen tearing ■■ DisplayPort or HDMI default is ON and can be adjusted ON/OFF in any mode, any resolution, any input source and any screen refresh rate ■■ Anti Motion Blur will be disabled, if FreeSync is enabled.