MSI Optix MAG240CR User Manual - Page 4
Safety Instructions
View all MSI Optix MAG240CR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Safety Instructions ◙◙ Read the safety instructions carefully and thoroughly. ◙◙ All cautions and warnings on the device or user's manual should be noted. ◙◙ Refer servicing to qualified personnel only. Keep the User's Guide that comes with the package for future reference. To prevent fire or shock hazard, keep this device away from humidity and high temperature. Lay this device on a reliable flat surface before setting it up. ◙◙ Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to iv the power outlet. Do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet. ◙◙ Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption. The ventilator on the device is used for air convection and to prevent the device from overheating. Do not cover the ventilator. Do not leave the device in an unconditioned environment with a storage temperature above 60OC or below -20OC, which may damage the device. NOTE: The maximum operating temperature is around 40OC. When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock. Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.