MSI P1 User Guide - Page 26
Fan Power Connector, CPU_FAN1, SYS_FAN1/2, FRONT_FAN1, REAR_FAN1, Chassis Intrusion Switch Connector
View all MSI P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
MS-9258 Server DVD/CD-ROM Connector: FPC1 (Optional) This connector is designed to connect slim DVD/CD-ROM drive. FPC1 Chassis Intrusion Switch Connector: JINT1 This connector connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record. CINTRU 1 GND 2 JINT1 Fan Power Connector: CPU_FAN1, SYS_FAN1/2, FRONT_FAN1, REAR_FAN1 The fan power connectors support system cooling fan with +12V. W hen connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. SYS_FAN2, REAR_FAN1 CPU_FAN1, SYS_FAN1, FRONT_FAN1 Important 1. Please refer to the recommended CPU fans at processor's official website or consult the vendors for proper CPU cooling fan. 2. Users are suggested to enter the BIOS Setup Utility to set up the Smart Fan Control function. 2-10 CONTROL SE NS OR +1 2V GND CONTROL SE NS OR +1 2V GND