MSI P31 NEO-F User Guide - Page 55
Auto Disable DIMM/PCI Frequency
UPC - 816909040975
View all MSI P31 NEO-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
MS-7392 Mainboard Adjusted DDR M emory Frequency It shows the adjusted DDR memory frequency. Read-only. Adjust PCI-E Frequency This field allows you to select the PCIE frequency (in MHz). Auto Disable DIMM/PCI Frequency W hen set to [Enabled], the system will remove (turn off) clocks from empty DIMM and PCI slots to minimize the electromagnetic interference (EMI). CPU Voltage This item allows you to increase the CPU voltage. M emory Voltage Adjusting the memory voltage can increase the memory speed. NB Voltage Adjust the North Bridge chipset voltage. VTT FSB Voltage This item allows you to set the FSB VTT voltage. SB I/O Power Adjust the South Bridge I/O voltage. SB Core Power Adjust the South Bridge core voltage. Spread Spectrum W hen the motherboard's clock generator pulses, the extreme values (spikes) of the pulses create EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves. If you do not have any EMI problem, leave the setting at Disabled for optimal system stability and performance. But if you are plagued by EMI, set to Enabled for EMI reduction. Remember to disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a temporary boost in clock speed which may just cause your overclocked processor to lock up. Important 1. If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability and performance. But if you are plagued by EMI, select the value of Spread Spectrum for EMI reduction. 2. The greater the Spread Spectrum value is, the greater the EMI is reduced, and the system will become less stable. For the most suitable Spread Spectrum value, please consult your local EMI regulation. 3. Remember to disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a temporary boost in clock speed which may just cause your overclocked processor to lock up. 3-22