MSI P35 PLATINUM COMBO User Guide - Page 23
Installing DDR2/DDR3 Turbo Card - overclocking
UPC - 816909040364
View all MSI P35 PLATINUM COMBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Hardware Setup Installing DDR2/DDR3 Turbo Card The DDR2/DDR3 Turbo Cards are memory switchers which should be installed in DIMM slots. If your memory is DDR2, you should install the DIMM_DDR3_1 side of DDR2/DDR3 Turbo Cards into DIMM_DDR3_1 and DIMM_DDR3_2. If your memory is DDR3, you should install the DIMM_DDR2_1 side of DDR2/DDR3 Turbo Cards into DIMM_DDR2_2 and DIMM_DDR2_4. DIMM_DDR2_1 Side DDR2/DDR3 Turbo Card DIMM_DDR3_1 Side W hen system memory is DDR2 Install the DIMM_DDR3_1 side of DDR2/DDR3 Turbo Cards intoDIMM_DDR3_1 and DIMM_DDR3_2 slots. W hen system memory is DDR3 Install the DIMM_DDR2_1 side of DDR2/DDR3 Turbo Cards intoDIMM_DDR2_2 and DIMM_DDR2_4 slots. Important - In Dual-Channel mode, make sure that you install memory modules of the same type and density in different channel DIMM slots. - To enable successful system boot-up, always insert the memory modules into the DIMM_DDR2_1 or DIMM_DDR3_1 first. - To overclock your DDR3 memory and raise FSB higher then 1333MHz, you must remove the DDR2/DDR3 Turbo Cards from the DIMM slots. 2-9