MSI P6NGM User Guide - Page 86
Installing Driver
View all MSI P6NGM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
nVidia RAID Installing Driver Install Driver in Windows Vista / XP / 2000 † New Windows Vista / XP / 2000 Installation The following details the installation of the drivers while installing W indows XP / 2000. 1. W hen you start installing Windows XP and older operating systems, you may encounter a message stating, "Setup could not determine the type of one or more mass storage devices installed in your system". If this is the case, then you are already in the right place and are ready to supply the driver. If this is not the case, then press F6 when prompted at the beginning of W indows setup. 2. Press the "S" key to select "Specify Additional Device". 3. You should be prompted to insert a floppy disk containing the NVIDIA RAID driver into the A: drive. Note: For W indows Vista you can use Floppy, CD/DVD or USB. Important Please follow the instruction below to make an "NVIDIA RAID Driver" for yourself. 1. Insert the MSI CD into the CD-ROM drive. 2. Click the "Browse CD" on the Setup screen. 3. Copy all the contents in the \\nVidia\System\MCP73\IDE\WinXP\sataraid to a formatted floppy disk. 4. The driver diskette for NVIDIA RAID Controller is done. 4. For W indows Vista: During the Operating system installation, after selecting the location to install Vista click on "Load Driver" button to install a third party SCSI or RAID driver. 5. W hen prompted, insert the floppy disk or media (Floppy, CD/DVD or USB) you created in step 3 and press Enter. 6. You should be shown a list of available SCSI Adapters. 7. Select the "NVIDIA RAID CLASS DRIVER" and press ENTER. 8. Press "S" again at the Specify Devices screen, then press ENTER. 9. Select "NVIDIA NForce Storage Controller" and then press ENTER. The fol- lowing W indows Setup screen appears listing both drivers: B-7