Mackie 402-VLZ3 Owner's Manual - Page 4
Read - mixer
View all Mackie 402-VLZ3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
402-VLZ3 Read This Page! We realize that you must be anxious to try out your new 402-VLZ3. All we ask is that you read this page now, and the rest can wait until you're good and ready. But do read it - you'll be glad you did. Adjusting input levels It's not even necessary to hear what you're doing to set o ptimal levels. But if you'd like to: Plug headphones into the phones jack, then set the phones knob just a little bit up. The following steps must be performed for channel 1 and 2: 1. Turn the gain and level knobs fully down (counterclockwise). 2. Set the EQ knobs at the center. 3. Connect the signal source to the input of channel 1. 4. Play something into channel 1. This could be an instrument, a singing or speaking voice, or a line input such as from a CD player or tape recorder output. Be sure that the volume of the input is the same as it would be during normal use. If it isn't, you might have to readjust these levels during the middle of the set. 5. Adjust the gain control so that the OL LED does not come on very often, if at all, even during the loudest parts of your program. 6. If you'd like to apply some EQ, do so now and repeat step 5. 7. Repeat for channel 2 if required. Instant Mixing Here's how to get going right away, assuming you have a microphone and a keyboard: 1. Plug your microphone into channel 1's mic input. 2. Turn on the 402-VLZ3. 3. Adjust the input levels. 4. Connect cords from the main outputs to the inputs of your amplifier. 5. Hook up speakers to the amplifier and turn it on. 6. Turn up the channel 1 level knob to the center and the main mix knob one quarter of the way up. 7. Sing like a canary! 8. Turn down the channel 3-4 level knob. 9. Plug your keyboard into stereo channel 3-4. 10. Play the keyboards and sing a little, and adjust the channel 3-4 level knob to add the keyboard to the vocals. 11. Play like a madman and sing like a canary! It's your first mix! Other Notes For optimum sonic performance, the channel level knobs and the main mix knob should be set near the "U" (unity gain) markings. Always turn the main mix control down before making connections to and from your mixer. If you shut down your equipment, turn off your amplifier or powered speakers first. When powering up, turn them on last. Save the shipping box! You may need it someday. 4 402-VLZ3