Mackie 402-VLZ3 Owner's Manual - Page 6
Hookup Diagrams - 4 channel
View all Mackie 402-VLZ3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
402-VLZ3 Hookup Diagrams Condenser microphone Acoustic Guitar SRM150 powered personal monitor SRM350v2 Powered Speaker Laptop iPodTM Docking Station This diagram shows a microphone connected to channel 1's mic input, with the phantom power switch pressed in. A guitar is attached to the instrument input of channel 2, with the instrument switch pressed in. An iPodTM docking station is connected to the line-level inputs of channels 3 and 4, so you can play to a pre-recorded backing track, or play music during the breaks caused by drinking too many free lattés. You may need two 1/4" to RCA adapters to make these connections. The tape outputs are connected to the line-level stereo inputs of a laptop's sound card. This allows you to record the entire performance using the DAW of your choice. The mic and guitar are panned mono, so the same mix is coming out of the main left and right outputs, and each can be used for a monitor or a front-of-house loudspeaker as follows: The left main mix output connects to an SRM150 powered personal monitor. This is pointed at the performer (the fabulous you). The right main mix output feeds the input of an SRM350v2 powered loudspeaker playing to your appreciative, jittery, hepped-up-on-the-bean audience. Jump quickly from one song to another, and keep the poetry about the Washington State Rain Festival (Jan 1st-Dec 31st) to a minimum. Seattle Coffeehouse Gig 6 402-VLZ3