Mackie C300z Owner's Manual - Page 10

C300z.specifications - 15 inch

Page 10 highlights

C300z SPECIFICATIONS System Specifications Frequency Response (-3 dB) 55 Hz - 18 kHz Frequency Range (-10 dB) 45 Hz - 20 kHz Maximum SPL Long-term @ 1m 123 dB Low-Frequency Crossover Type 24 dB/octave, time offset corrected High-Frequency Crossover Type 24 dB/octave Crossover Frequency 1800 Hz Audio Input Type: Speakon®-style NL4 jack 1/4-inch TS phone jack Input Impedance 8 ohms Power Handling rms: 300 watts music: 500 watts peak: 750 watts Operating Temperature Range -10ºC to 45ºC (14ºF to 113ºF) Transducer Specifications Low-Frequency Transducer Diameter 12 in/300 mm Voice Coil Diameter 3.0 in/75 mm Sensitivity (1W@1m) 98 dB Nominal Impedance 8 ohms Power Handling 300 watts Frequency Range 50 Hz - 3000 Hz High-Frequency Driver and Horn Diaphragm Diameter 1.75 in/44.5 mm Exit Throat Diameter 1 in/24.5 mm Diaphragm Material Titanium Sensitivity (1W@1m) 106 dB Nominal Impedance 8 ohms Power Handling 150 watts Frequency Range 1000 Hz - 20000 Hz Horn Type Composite: Exponential and Conical Mouth Size 12 in/305 mm W x 7 in/178 mm H Horizontal Coverage 90º ±10º (1 kHz - 20 kHz) Vertical Coverage 45º ±10º (2.8 kHz - 20 kHz) Safety Features Over-Excursion Protection Second-Order High-Pass Filter Driver Protection Dynamic protection for compression driver Construction Features Basic Design Enclosure Alignment Material Finish Handles Mounting Methods Grille Asymmetrical Trapezoidal Sixth-Order Polypropylene Grey, textured finish One on each side, one on top Integrated mounting points, M10 Two located on each side, top, bottom, and rear of enclosure Perforated metal with weatherresistant coating Physical Properties Height 26 in/660 mm Width 15.4 in/390 mm Depth 14.8 in/376 mm Weight 43 lbs/19.5 kg Options PA-A1 forged shoulder eyebolt hardware (M10 x 1.5 mm x 20 mm) Disclaimer Since we are always striving to make our ­products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice. "Mackie" and the "Running Man" figure are registered trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or ­registered trademarks of their respective holders, and are hereby acknowledged. ©2004-2008 LOUD Technologies Inc. All Rights Reserved. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

10
C300z.SPECIFICATIONS
System Specifications
Frequency Response (–3 dB)
55 Hz – 18 kHz
Frequency Range (–10 dB)
²5 Hz – ±0 kHz
Maximum SPL Long-term @ 1m
1±³ dB
Low-Frequency Crossover Type
±² dB/octave, time offset corrected
High-Frequency Crossover Type
±² dB/octave
Crossover Frequency
1800 Hz
Audio
Input Type:
Speakon®-style NL² jack
1/²-inch TS phone jack
Input Impedance
8 ohms
Power Handling
rms:
³00 watts
music:
500 watts
peak:
750 watts
Operating Temperature Range
–10ºC to ²5ºC
(1²ºF to 11³ºF)
Transducer Specifications
Low-Frequency Transducer
Diameter
1± in/³00 mm
Voice Coil Diameter
³.0 in/75 mm
Sensitivity
(1W@1m)
98 dB
Nominal Impedance
8 ohms
Power Handling
³00 watts
Frequency Range
50 Hz – ³000 Hz
High-Frequency Driver and Horn
Diaphragm Diameter
1.75 in/²².5 mm
Exit Throat Diameter
1 in/±².5 mm
Diaphragm Material
Titanium
Sensitivity
(1W@1m)
10´ dB
Nominal Impedance
8 ohms
Power Handling
150 watts
Frequency Range
1000 Hz – ±0000 Hz
Horn Type
Composite: Exponential and Conical
Mouth Size
1± in/³05 mm W x 7 in/178 mm H
Horizontal Coverage
90º µ10º (1 kHz – ±0 kHz)
Vertical Coverage
²5º µ10º (±.8 kHz – ±0 kHz)
Safety Features
Over-Excursion Protection
Second-Order High-Pass Filter
Driver Protection
Dynamic protection for compression driver
Construction Features
Basic Design
Asymmetrical Trapezoidal
Enclosure Alignment
Sixth-Order
Material
Polypropylene
Finish
Grey, textured finish
Handles
One on each side, one on top
Mounting Methods
Integrated mounting points, M10
Two located on each side, top,
bottom, and rear of enclosure
Grille
Perforated metal with weather-
resistant coating
Physical Properties
Height
±´ in/´´0 mm
Width
15.² in/³90 mm
Depth
1².8 in/³7´ mm
Weight
²³ lbs/19.5 kg
Options
PA-A1 forged shoulder eyebolt hardware
(M10 x 1.5 mm x ±0 mm)
Disclaimer
Since we are always striving to make our products better
by incorporating new and improved materials, components,
and manufacturing methods, we reserve the right to change
these specifications at any time without notice.
“Mackie” and the “Running Man” figure are regis-
tered trademarks of LOUD Technologies Inc.
All other brand names mentioned are trademarks or
registered trademarks of their respective holders, and are
hereby acknowledged.
©±00²-±008 LOUD Technologies Inc.
All Rights Reserved.