Mackie C300z Owner's Manual - Page 4

Hookup.diagrams - speaker

Page 4 highlights

HOOKUP DIAGRAMS Quick Start Make all initial connections with the power switches OFF on all equipment. Make sure all master volume, level, or gain controls are all the way down. 1. Connect the line-level outputs from your mixing console (or other signal source) to the inputs of your power amplifier. 2. Connect the "Speaker Output" from your power amplifier (or powered mixer) to one of the INPUT connectors on the C300z, either the 1/4" TS jack or the NL4 Speakon™-style connector. 3. Turn on your mixing console (or other signal source). 4. Turn on the amplifier. Turn up its volume or gain control(s) as recommended by the manufacturer. 5. Start the signal source, whether it be speaking into a microphone or starting a CD player. Adjust the volume controls on the mixer (or other signal source) for normal operation. POWERED MIXER MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL C300z: WITH A POWERED SPECIFICATIONS: POWER HANDLING: RMS • 300 WATTS MUSIC • 500 WATTS PEAK • 750 WATTS IMPEDANCE • 8 OHMS HORN DISPERSION • 90° X 40° WIDE DISPERSION EVERYBODY HEARS THE SAME THING PROLONGED EXPOSURE TO HIGH SOUND PRESSURE LEVELS MAY LEAD TO PERMANENT HEARING DAMAGE. PLEASE USE CARE WHEN SETTING MAXIMUM LOUDNESS. MIXER, and using SPECIFICATIONS: POWER HANDLING: RMS • 300 WATTS MUSIC • 500 WATTS PEAK • 750 WATTS IMPEDANCE • 8 OHMS HORN DISPERSION • 90° X 40° WIDE DISPERSION EVERYBODY HEARS THE SAME THING PROLONGED EXPOSURE TO HIGH SOUND PRESSURE LEVELS MAY LEAD TO PERMANENT HEARING DAMAGE. PLEASE USE CARE WHEN SETTING MAXIMUM LOUDNESS. the thru jack POWERED MIXER POWERED MIXER MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF BUILT IN SUSPENSION HARDWARE. SERIAL NUMBER MANUFACTURING DATE MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF BUILT IN SUSPENSION HARDWARE. SERIAL NUMBER MANUFACTURING DATE DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA • COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA • COPYRIGHT ©2003 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING INPUT PARALLEL THRU C300z INPUT PARALLEL THRU C300z Stereo Power Amplifier Left Line level Output Mixer or Preamplifier Right Line level Output 1202-VLZ PRO C300z: WITH A MIXER and POWER AMPLIFIER 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

²
Mixer or
Preamplifier
Right
Line level
Output
Left
Line level
Output
INPUT
THRU
PARALLEL
INPUT
THRU
PARALLEL
Stereo
Power Amplifier
C300z
C300z
HOOKUP.DIAGRAMS
³.
Turn on your mixing console (or other signal
source).
².
Turn on the amplifier. Turn up its volume or
gain control(s) as recommended by the manu-
facturer.
5. Start the signal source, whether it be speak-
ing into a microphone or starting a CD player.
Adjust the volume controls on the mixer (or
other signal source) for normal operation.
Quick.Start
Make all initial connections
with the power switches OFF
on all equipment. Make sure
all master volume, level, or gain
controls are all the way down.
1. Connect the line-level outputs from your
mixing console (or other signal source) to the
inputs of your power amplifier.
±.
Connect the “Speaker Output” from your power
amplifier (or powered mixer) to one of the
INPUT
connectors on the C³00z, either the 1/²"
TS jack or the NL² Speakon™-style connector.
C300z: WITH A MIXER AND POWER AMPLIFIER
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS
2 PER POWERED MIXER OR AMPLIFIED CHANNEL
POWERED MIXER
C300z: WITH A POWERED MIXER, AND USING THE THRU JACK