Mackie Onyx FireWire Owner's Manual - Page 7

Slide the FireWire card into the slot. There are two supporting legs on - mixer

Page 7 highlights

Owner's Manual Set the blank plate aside. You won't need it again, unless you want to remove the Onyx FireWire card sometime in the future. Then you'll want to reinstall the blank plate. 4. Remove the FireWire card from the anti-static bag. CAREFULLY line up the connector on the ribbon cable with the connector on the back edge of the FireWire card and slide the connectors together, taking care not to bend any 16 INSERT 15 INSERT 14 INSERT 13 INSERT 12 INSERT 11 INSERT 10 INSERT 9 INSERT 8 INSERT 7 INSERT 6 INSERT 5 INSERT 4 INSERT 3 INSERT 2 INSERT 1 INSERT of the pins. Note that there is an alignment tab on the top of the ribbon cable LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE HI-Z HI-Z connector that must align with the top of the connector on the FireWire card. BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC MIC ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE ONYX MIC PRE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR SERIAL NUMBER MANUFACTURING DATE TALKBACK MIC +48V MAIN OUTS RIGHT +4dB MIC L MAIN LEFT OUTPUT LEVEL MAIN OUT R MONO MAIN INSERT L TAPE TAPE INPUT OUTPUT C-R OUT L L R R L R R SUB OUT 3 1 4 2 AUX RETURN 4 3 2 1 L (MONO) R L (MONO) R L (MONO) R AUX SEND 5 3 1 6 4 2 BALANCED +6 BAL /UNBAL (TIP=SEND RING=RETURN) BAL /UNBAL BAL /UNBAL BAL /UNBAL BAL /UNBAL DESIGNED BY MACKOIDS IN WOODINVILLE, WA , USA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE • COPYRIGHT ©2004 • THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC.: "MACKIE", "ONYX", AND THE "RUNNING MAN" FIGURE • US PATENT NUMBER 29/049,129 POWER ON ~100-240 VAC 50/60 Hz 80W RECORDING OUTS 1-8 POST GAIN PRE INSERT 9-16 (BALANCED) (BALANCED) OO OO OO Top of Onyx FireWire Card 5. Slide the FireWire card into the slot. There are two supporting "legs" on the back of the card. Angle the back edge of the card upward so the legs clear the 16 INSERT 15 INSERT 14 INSERT 13 INSERT 12 INSERT 11 INSERT 10 INSERT 9 INSERT 8 INSERT 7 INSERT 6 INSERT 5 INSERT 4 INSERT 3 INSERT 2 INSERT 1 INSERT edge of the slot in the back of the Onyx mixer. Line up the two holes in the LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE HI-Z HI-Z BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- UN- BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL BAL plate with the screw holes in the back panel. MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE MIC ONYX MIC PRE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR SERIAL NUMBER MANUFACTURING DATE TALKBACK MIC +48V MAIN OUTS RIGHT +4dB MIC L MAIN LEFT OUTPUT LEVEL MAIN OUT R MONO MAIN INSERT L TAPE TAPE INPUT OUTPUT C-R OUT L L R R L R R SUB OUT 3 1 4 2 AUX RETURN 4 3 2 1 L (MONO) R L (MONO) R L (MONO) R AUX SEND 5 3 1 6 4 2 BALANCED +6 BAL /UNBAL (TIP=SEND RING=RETURN) BAL /UNBAL BAL /UNBAL BAL /UNBAL BAL /UNBAL DESIGNED BY MACKOIDS IN WOODINVILLE, WA , USA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE • COPYRIGHT ©2004 • THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC.: "MACKIE", "ONYX", AND THE "RUNNING MAN" FIGURE • US PATENT NUMBER 29/049,129 POWER ON ~100-240 VAC 50/60 Hz 80W RECORDING OUTS 1-8 POST GAIN PRE INSERT 9-16 Into Bottom Panel (BALANCED) Into Bottom Panel (BALANCED) 24-BIT/96kHz MULTI-CHANNEL FIREWIRE I/O OPTION CARD DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA COPYRIGHT ©2004 LOUD TECHNOLOGIES INC. MAX MAIN MIX TRIM A B LISTED ACCESSORY FOR USE WITH ONYX MIXERS 65HJ 6. Secure the FireWire card in place with the two screws that previously held the blank plate in place. Two more screws are provided with your FireWire card. These go into the bottom of the Onyx mixer and secure the two supporting legs on the back of the card to the chassis. 7. That's it! Now go enjoy a nice cold one before proceeding to the next section. Owner's Manual 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

7
Owner’s Manual
Owner’s Manual
Set the blank plate aside. You won’t need it again, unless you want to remove
the Onyx FireWire card sometime in the future. Then you’ll want to reinstall
the blank plate.
4.
Remove the FireWire card from the anti-static bag. CAREFULLY line up the
connector on the ribbon cable with the connector on the back edge of the
FireWire card and slide the connectors together, taking care not to bend any
of the pins. Note that there is an alignment tab on the top of the ribbon cable
connector that must align with the top of the connector on the FireWire card.
TALKBACK
MIC
RECORDING OUTS
POST GAIN PRE INSERT
(BALANCED)
(BALANCED)
9-16
1-8
~100-240 VAC
50/60 Hz 80W
O
O
+6
SUB OUT
C-R OUT
MAIN
INSERT
(TIP=SEND
RING=RETURN)
TAPE
INPUT
TAPE
OUTPUT
MAIN OUT
AUX SEND
AUX RETURN
3
R
L
MONO
R
R
R
R
L
R
L
R
L
R
L
L
L
L
1
4
2
5
1
2
3
4
3
1
6
4
2
(MONO)
(MONO)
(MONO)
DESIGNED BY MACKOIDS IN WO
ODINVILLE, WA , USA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE • COPYRIGHT ©2004 • THE FOLLOWING AR
E
TRADEMARKS OR
REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC.: "MACKIE", "ONYX", AND THE "RUNNING MAN" FIGURE •
US PATENT NU
MBER 29/049,129
MAIN
OUTPUT
LEVEL
RIGHT
LEF
T
MAIN OUTS
MIC
+4dB
POWER
ON
BAL/UNBAL
BAL/UNBAL
BAL/UNBAL
BAL/UNBAL
BAL/UNBAL
BALANCED
SERIAL NUMBER
MANUFACTURING DATE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
+
48V
Top of Onyx FireWire Card
5.
Slide the FireWire card into the slot. There are two supporting “legs” on the
back of the card. Angle the back edge of the card upward so the legs clear the
edge of the slot in the back of the Onyx mixer. Line up the two holes in the
plate with the screw holes in the back panel.
TALKBACK
MIC
RECORDING OUTS
POST GAIN PRE INSERT
(BALANCED)
(BALANCED)
9-16
1-8
~100-240 VAC
50/60 Hz 80W
O
O
+6
SUB OUT
C-R OUT
MAIN
INSERT
(TIP=SEND
RING=RETURN)
TAPE
INPUT
TAPE
OUTPUT
MAIN OUT
AUX SEND
AUX RETURN
3
R
L
MONO
R
R
R
R
L
R
L
R
L
R
L
L
L
L
1
4
2
5
1
2
3
4
3
1
6
4
2
(MONO)
(MONO)
(MONO)
D
ESIGNED BY MACKOIDS IN WOODINVILLE, WA , USA • MANUFACTURED IN CHINA • FABRIQUE EN CHINE • COPYRIGHT ©2004 • THE FOLLOWING ARE TRADEMARKS OR
REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC.: "MACKIE", "ONYX", AND THE "RUNNING MAN" FIGURE •
US PATENT NU
MBER 29/049,129
MAIN
OUTPUT
LEVEL
RIGHT
LEF
T
MAIN OUTS
MIC
+4dB
POWER
ON
BAL/UNBAL
BAL/UNBAL
BAL/UNBAL
BAL/UNBAL
BAL/UNBAL
BALANCED
SERIAL NUMBER
MANUFACTURING DATE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
+
48V
Into
Bottom
Panel
Into
Bottom
Panel
MAX
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA
COPYRIGHT ©2004 LOUD TECHNOLOGIES INC.
MAIN MIX TRIM
24-BIT/96kHz MULTI-CHANNEL
FIREWIRE I/O OPTION CARD
A
B
6.
Secure the FireWire card in place with the two screws that previously held
the blank plate in place. Two more screws are provided with your FireWire
card. These go into the bottom of the Onyx mixer and secure the two support-
ing legs on the back of the card to the chassis.
7.
That’s it! Now go enjoy a nice cold one before proceeding to the next section.