Mackie S225 Owner's Manual - Page 4
Hookup Diagrams - speakers
View all Mackie S225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
HOOKUP DIAGRAMS Quick-Start Make all initial connections with the power switches OFF on all equipment. Make sure all master volume, level, or gain controls are all the way down. 1. Connect the line-level outputs from your mixing console (or other signal source) to the inputs of your power amplifier. 2. Connect the "Speaker Output" from your power amplifier (or powered mixer) to the INPUT connector on the S225. 3. Turn on your mixing console (or other signal source). 4. Turn on the amplifier. Turn up its volume or gain control(s) as recommended by the manufacturer. 5. Start the signal source, whether it be speaking into a microphone or starting a CD player. Adjust the volume controls on the mixer (or other signal source) for normal operation. S225 S225 DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA "MACKIE" AND THE "RUNNING MAN" FIGURE ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004 S225 S225 DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA "MACKIE" AND THE "RUNNING MAN" FIGURE ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004 NOMINAL IMPEDANCE: 4 OHMS POWER HANDLING: CONT/ 700W • PEAK / 2800W + - TIP SLEEVE 1/4" NOMINAL IMPEDANCE: 4 OHMS POWER HANDLING: CONT/ 700W • PEAK / 2800W + - TIP SLEEVE 1/4" + - + - + - + - 1 1 1 1 PIN PIN PIN PIN Stereo Power Amplifier Left Line-level Output Mixer or Preamplifier Right Line-level Output 1202-VLZ PRO NL4 SERIAL NUMBER MANUFACTURING DATE SERIAL NUMBER MANUFACTURING DATE NL4 S225: WITH A MIXER AND POWER AMPLIFIER S225 S225 S225 S225 Stereo Power Amplifier From LEFT SPEAKER OUT From RIGHT SPEAKER OUT Stereo Power Amplifier Line-level THRU Connection From LEFT SPEAKER OUT From RIGHT SPEAKER OUT 1202-VLZ PRO S225: WITH A MIXER AND TWO POWER AMPLIFIERS 4