Macrom M-TVT300D User Manual (English) - Page 16

1.OSD Timeout option sets some information hint dialogue box and displays time length, move the cursor to OSD Timeout option, press VOL+/- key to choose circularly between Bottom and Top; 2.OSD Language option: The system has the user interface supporting a couple of languages, you can set language via OSD language option: (1).Move the cursor onto OSD Language option, Press RIGHT key to enter OSD Language List as shown in Figure 2.21: (2).Press VOL+/- key choose language; (3).Press OK key to confirm system interface language selection,then the setting is effective, and then the interface language turns into the currently chosen language, the cursor can move onto OSD Language, option on the left; 3. 1st Audio Language option: Press VOL+ key to enter the currently supported Audio Language list, in the Audio Language list, press CH+/- key to choose language, press OK key to confirm; 4. 2nd Audio Language option: Press VOL+ key to enter the currently supported Audio Language list, in the Audio Language list, in the Audio Language list, press CH+/- key to choose language, press OK key to confirm; 5.Press OK key to confirm the editing action in OSD menu, the system will hint with "Update succeeds"and then return to the previous menu. 2.3.2 TV TV set up provides convenient TV input mode, you can via menu (MENU→Digital TV→Configuration→TV),enter TV set . All options are listed on the left of the menu, when the cursor moves to the option on the left of the TV menu, the values corresponding to this option can be display on the right of the menu. 2.3.2.1 Display Mode TV mode can change the mode of the on put video, you can adjust TV mode according to the actual situation of you receiving equipment. (1).Move the cursor to Display Mode option, press VOL+/- key to choose circularly among the options, and the TV mode set can be effective immediately; (2).TV Mode can be set as Auto, PAL, NTSC; (3).Default TV Mode: AUTO; (4).Press OK key to save the setting, the system will hint with "Update succeeds" 2.3.2.2 Aspect Ratio Video output mode can change the mode of video out put, you can adjust TV mode according to actual situation of you receiving equipment. (1).Move the cursor to Aspect Ratio option, press VOL+/- key to move circularly and choose options; . 15