Magic Chef MCD990ARB User Manual - Page 11

OPERATION PROCEDURE This section includes useful information about oven operation. 1. Plug power supply cord into a standard 3-pronged 15 Amp, 120V AC 60Hz power outlet. 2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray and roller guide must always be in place during cooking. 3. Shut the door. Make sure that it is firmly closed. 1 The oven light is on only when the microwave oven is operating. 2 The oven door can be opened at any time during operation by pushing the door release button on the control panel. The oven will automatically shut off. 7 When the STOP/CLEAR pad is touched during the oven operation, the oven stops cooking and all information retained. To erase all information(except the present time), touch the STOP/CLEAR pad once more. If the oven door is opened during the oven operation, all information is retained. 3 Each time a pad is touched, a BEEP will sound to acknowledge the touch. 4 The oven automatically cooks on full power unless set to a lower power level. 5 The display will show " : 0" when the oven is plugged in. 6 Time clock returns to the present time when the cooking time ends. 8 If the START pad is touched and the oven does not operate, check the area between the door and door seal for obstructions and make sure the door is closed securely. The oven will not start cooking until the door is completely closed or the program has been reset. Make sure the oven is properly installed and plugged into the electrical outlet. WATTAGE OUTPUT CHART • The power-level is set by touching the POWER pad. The chart shows the display, the power level and the percentage of power. Touch POWER pad once twice 3 times 4 times 5 times 6 times 7 times 8 times 9 times 10 times 11 times Power level (Display) P-HI P-90 P-80 P-70 P-60 P-50 P-40 P-30 P-20 P-10 P-00 Approximate Percentage of Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 10