Magic Chef MCSRG24S User Manual - Page 17

Oven Door Exterior • It is recommended to use glass cleaner and paper towel or non-abrasive plastic scrubbing pad. • It is recommended to apply glass cleaner to soft cloth or sponge. • DO NOT apply directly to panel. Grates and End Caps • DO NOT clean until the grates and caps have cooled. • DO NOT reassemble grates and caps if they are still wet. • To avoid chipping, do not bang grates and caps against each other or hard surfaces. • It is recommended to utilize mildly abrasive cleaner. • It is recommended to utilize a non-abrasive cloth or plastic scrubbing pad. Burner Spreader • It is recommended to frequently wash the burner spreader with boiling water and detergent to remove any deposit build up. This will maintain steady flame output. • Always dry the burner spreader thoroughly before re-installing. Control Panel • DO NOT spray glass cleaner on glass control panel. • DO NOT use abrasive cleaners, steel wool pads, and gritty wash cloths. Damage may occur. • Apply glass cleaner to soft cloth or sponge then begin cleaning glass panel. Oven Cavity NOTE: At high temperatures, foods react with porcelain, so staining, etching, pitting or faint white spots can result. • DO NOT begin cleaning the oven cavity until it has fully cooled. • DO NOT use oven cleaners. • It is recommended to use mild detergent and warm water. • It is recommended to use soft cloth or non-abrasive plastic scrubbing pad. Oven Light Replacement CAUTION: Before replacing, make sure the oven and cooktop are cool and all control knobs are to the OFF position. 1. Remove the light cover by rotating it counter-clockwise. (Refer to Figure 15.) Figure 15 2. Then remove the light bulb by rotating it counter-clockwise. 3. Replace the old light bulb with a new oven-safe light bulb with the following characteristics. • Light bulb is a standard 25 - Watt (G9) appliance bulb • Voltage: 120V • Wattage: 25W 4. Re-install light cover by rotating it clockwise. 17