Magic Chef MCWBC24DZ1 User Manual - Page 11
Temperature Setting, Interior Light
![]() |
View all Magic Chef MCWBC24DZ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11 Temperature Setting • Unlock the control panel by pressing the lock pad for approximately 3 seconds. Once the control panel is unlocked, an audible beep will be heard and the lock indicator light will go out. • Under normal conditions, the temperature display indicates the current temperature of the corresponding zone. When adjusting the temperature, the temperature display will flash to indicate that the temperature is being adjusted. • The temperature in the left & right zones can be set independently by pressing the warmer or colder pads that correspond to the desired zone. The temperature range of both zones can be set between 39oF to 65oF (4oC to 18oC) +/- 5oF. • When the warmer or colder pad is pressed, the temperature displayed will increase or decrease in increments of one degree. If the warmer or colder pad is pressed and held for 2 seconds, the temperature displayed will increase or decrease at a speed of one degree per half second. • Once you have adjusted the left and/or right zone to the desired temperature, release the temperature pad. At this time the temperature displayed will flash for approximately 3 seconds to confirm the selected temperature. Once the display stops flashing the temperature display will indicate the current temperature of that zone. Note: The temperature display can be changed between Celsius and Fahrenheit by simultaneously pressing and holding both warmer and colder pads for approximately 3 seconds. This unit cannot be in lock mode to perform this operation. Interior Light • To turn on / off the interior light, press the lock mode to perform this operation. light pad. The unit cannot be in the Note: The light will turn on / off after the touch pad is released. EN - 11
![](/manual_guide/products/magic-chef-mcwbc24dz1-user-manual-ea0cec9/11.png)