Magnavox 27MDTR20 User manual, English - Page 23

T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 23 Setting the Clock (cont'd) 23 4 If you already know your PBS channel number, skip ahead to step 8. If you do not know the channel number of your PBS station, press ▼ to select AUTO CLOCK CH SEARCH.Then press ENTER. 11 - SETTING CLOCK - AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] MANUAL CLOCK SET D.S.T. [OFF] ● The TV/DVD/VCR will search for a channel that 4,7-9 5-6,10 carries a time signal. Channels that carry the time will appear at the top of the screen. Use one of these channels when you enter your AUTO CLOCK CH at step 9. This may take several minutes. An ''_ _" appears in the lower left corner of the screen when the search is complete. - AUTO CLOCK CH SEARCH - 08 10 13 STANDBY-ON PICTURE SLEEP SELECT 123 CH. 456 789 +100 0 +10 SPEED C.RESET ZOOM VOL. MUTE RECORD PLAY STOP DISC MENU DISPLAY SETUP TITLE ENTER RETURN CLEAR SEARCH MODE REPEAT REPEAT A-B MODE AUDIO SUBTITLE ANGLE - - 5 Press SETUP to remove the AUTO CLOCK CH SEARCH screen. 6 Press SETUP to access the menu again. 7 Press ▲ or ▼ to select SETTING CLOCK. Then, press ENTER. 8 Press ▼ to select AUTO CLOCK CH, then press ENTER. - SETTING CLOCK - AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [08] MANUAL CLOCK SET D.S.T. [OFF] 9 Press { or B until the channel number of your PBS station appears. Use the channel number you found at step 4. 10 Press SETUP to remove the menu. 11 Press STANDBY-ON to turn off the TV/VCR/DVD and let the PBS channel update the clock. Helpful Hints • During the Auto Clock Channel Search, the picture may be distorted.This is normal. • If there are no PBS stations available, set AUTO CLOCK to off. Set the clock manually. • If the TV/VCR/DVD is connected to a Cable Box or Satellite Receiver, select the local PBS station on the Cable Box/Satellite Receiver. Set the TV/VCR/DVD to the output channel of the Cable Box/Satellite Receiver (03, 04, or AUX).