Magnavox 32MD311B User manual, English (US) - Page 21

English 21 INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES Channel Before you begin: Make sure the unit is connected to antenna or cable. 1 Use ▲/▼ to select the item you want to adjust, then press OK. Picture Sound Channel Features Language DVD Autoprogram Channel List Add Channels Antenna Note • After setting [Autoprogram], using CH +/− on the remote control skips unavailable programs automatically. • If you are not receiving a signal from your cable service, contact the Cable provider. • If you press or MENU during autoprogram, the setup of TV channels will be canceled. • Even if [Autoprogram] is completed, the channel setting will be lost if the AC power cord is unplugged before the unit goes into standby mode by pressing . • The PIN code will be required once you set a PIN code in the [Child Lock]. ➠ p.23 • If you want to change your PIN code, follow the instruction of [Change PIN]. ➠ p.25 Channel List The channels selected here can be skipped when selecting the channels using CH + / −. Those channels can still be selected with the Number buttons. 2 Adjust the following items. Autoprogram If you switch wires (e.g. between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channels you deleted, it is recommended to use Autoprogram to perform a new channel search. 1 Use ▲/▼ to select [Autoprogram], then press OK. 2 Use ▲/▼ to select an appropriate option, then press OK. Picture Sound Channel Features Language DVD Autoprogram will rescan all channels. Auto programming may take more than 20 minutes to complete. Select your signal source. Antenna Back Antenna Cable Cable Or ANT.IN • When connected to VHF / UHF antenna, select [Antenna]. • When connected to CATV, select [Cable]. • [Autoprogram] will begin. 1 Use ▲/▼ to select [Channel List], then press OK. 2 Use ▲/▼ to select the channel you want to remove, then press OK. Picture Sound Channel Features Language DVD Highlight channels for Ch Up / Down key selection. DTV 11.1 DTV 11.2 DTV 11.3 Ch Select OK Watch / Skip BACK Back • The channel display for the removed channel darkens. You will not be able to select the channel again using CH +/−. • To reactivate a removed channel, use ▲/▼ and press OK.The registered channels are highlighted. • When you remove a main channel, its subchannels are removed as well. Note • The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC. USEFUL TIPS INFORMATION Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete. 75% Digital channels Analog channels 10 ch 6 ch MENU Exit • When the scanning and memorizing are completed, the lowest memorized channel will be displayed.