Magnavox DP100MW8 Owners Manual - Page 7

SETUP Connection to an Audio System Analog Audio Connection Digital Audio Connection Audio stereo system analog audio input jacks L R Dolby Digital decoder, MD deck or DAT deck COAXIAL Digital audio input jack This unit RCA audio cable AUDIO OUT L R AUDIO OUT Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store. Rear Terminals digital audio coaxial cable DIGITAL AUDIO OUT DIGITAL AUDIO OUT COAXIAL Connection Setting SETUP > AUDIO> DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to the other device (an MD deck or DAT deck etc.) without Dolby Digital decoder. PCM * To complete these settings, refer to pages 14-15. Note: • The audio source on a disc in a Dolby Digital multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi-channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. 12 45 CB/PB Y L DIGITAL AUDIO OUT S-VIDEO OUT CR/PR VIDEO OUT COMPONENT VIDEO OUT R AUDIO COAXIAL OUT 3 1 S-VIDEO OUT jack Connect an optional S-video cable here through the S-video in jack of a television. 2 COMPONENT VIDEO OUT jacks Connect optional component video cable here through the component video in jacks of a television. 3 VIDEO OUT jack Connect a yellow video cable here through the video in jack of a television. 4 AUDIO OUT jacks Connect an audio cable here through the audio in jacks of a television or other audio device. 5 DIGITAL AUDIO OUT COAXIAL jack Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver. Note: • Please purchase the necessary cables at your local store. (Refer to pages 6-7.) - 7 - EN