Magnavox DP100MW8 Owners Manual - Page 9

DVD FUNCTIONS Please note : most instructions in this manual refer to remote control use. Playback Before: Turn on the TV, amplifier and any other device which are connected to this unit. Make sure the TV and audio receiver are set to the correct channel. 2 ( ) ⇒on page 10 1 Press [STANDBY-ON] to turn on this unit. 2 Press [OPEN / CLOSE A] and insert a disc with label facing up. 2 STANDBY-ON OPEN/CLOSE SEARCH 1 DISPLAY MODE AUDIO 1 2 3 SUBTITLE 4 5 6 ANGLE 7 8 9 REPEAT CLEAR 0 +10 A-B PAUSE SKIP 3 Press [PLAY B] to start playback. 3 4 Press [STOP C] to stop playback. 4 SLOW PLAY REV FWD STOP Lights up when power is on. P-SCAN OPEN/ CLOSE PLAY STOP IR 2 2341 Note: • When you play back a CD-RW/-R with MP3 files, details on page 10. • A " " may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit. • Some DVD may start playback from title 2 or 3 due to specific programs. • During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction. • You can change the on-screen language in "PLAYER MENU" setting. (Refer to page 14.) Disc Menu Fast Forward / Reverse Search DVD FUNCTIONS Some discs contain menus which allow you to customize DVD playback. Use [K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]). Calling Up a Menu Screen during Playback • Press [MENU] to call up the disc menu. • Press [TOP MENU] to call up the title menu. Note: • Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details. Resume Playback Press [STOP C] during playback. Resume icon will appear at the top-left on the TV screen. Press [PLAY B], playback will resume from the point at which playback was stopped. R.STOP Note: • To cancel resume, press [STOP C] one more time in the stop mode. • The resume information will be kept even when unit is in standby mode. • For MP3, playback will resume from the beginning of the track at which playback was stopped. Paused and Step-by-Step Playback Use [FWD g] or [REV h] repeatedly during playback to select the required forward or reverse speed. E 1 To continue playback, press [PLAY B]. Note: • Fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2), 2(x4), 3(x8), 4(x16) and 5(x32). Slow Forward Search Press [FWD g] repeatedly in the pause mode to select the required forward speed. 1 To continue playback, press [PLAY B]. Note: • Slow forward speed is different depending on the disc. Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and 5(1/2). • Set "STILL MODE" to "FIELD" in "DISPLAY" menu if pictures in the slow playback mode are blurred. (Refer to pages 14-15.) • The reverse of slow playback is not available. Zoom 1) Press [ZOOM] repeatedly during playback to select the required zoom factor: x2, x3, x4, x1/2 or off. x2 x3 x4 x1/2 Press [PAUSE F] during playback. To continue playback, press [PLAY B]. PAUSE 2) Use [K / L / s / B] to slide the zoomed picture across the screen. The disc goes forward by one frame each time [PAUSE F] is pressed in the pause mode. To continue playback, press [PLAY B]. Note: • Set "STILL MODE" to "FIELD" in "DISPLAY" menu if pictures in the pause mode are blurred. (Refer to pages 14-15.) 3) To exit zoom function, press [ZOOM] repeatedly to select OFF. Note: • Zooming function does not work while the disc menu is displayed. • Some part of the picture may not be zoomed depending on the disc or playback status. - 9 - EN