Magnavox MC132EMG User manual, English (US) - Page 26

26 Rerecording (Tape Duplication) AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) Audio Cable from AUDIO OUT to AUDIO In (white) Video Cable from VIDEO OUT to VIDEO In (yellow) AUDIO and VIDEO In Jacks on the front of the TV/VCR 1 Make the connections shown above, using audio and video cables (not supplied). Connect the source unit (VCR or Camcorder) to a power source after connections are made. 2 The VCR or Camcorder will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press STOP on the unit. 3 The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape's record tab is intact and the TV/VCR is on. 4 Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that AUX appears on the screen. The TV/VCR is now in Line Input or Auxiliary mode. 5 Point the TV/VCR remote control at the TV/VCR. Press SPEED until the desired tape speed (SP or SLP) appears on the screen. 6 Press PLAY on the source unit and REC(ord)/OTR on your TV/VCR at the same time. Copying will begin. 7 To stop copying, press STOP/EJECT on the TV/VCR, then stop the tape on the VCR or Camcorder. Helpful Hints • Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently. • Make sure all connections are secure. Otherwise, you may not record both picture and sound. • Programs that are copyright protected may not record clearly. • Tape speed details are on page 10.