Magnavox MDR513H User manual, English (US) - Page 112

SETUPS HDMI OPEN/ STANDBY-ON DTV/TV SOURCE CLOSE .@/: ABC DEF GHI JKL MNO CHANNEL PQRS TUV WXYZ SPACE CLEAR SETUP AUDIO REPEAT HDMI DISC MENU TITLE OK DISPLAY RETURN V.REPLAY V.SKIP RAPID PLAY D.DUBBING TIMER HDD DVD REC MODE REC 1 Press [SETUP] in stop mode and use [K / L] to select "General Setting", then press [OK]. 2 Use [K / L] to select "HDMI", then press [OK]. Playback Display Video Recording Clock Channel HDMI Reset All • You cannot select HDMI when an HDMI cable is not connected and the items are shown in grey color. 3 Use [K / L] to select a desired item, then press [OK]. 1 Format 2 HDMI Audio 3 RGB Range 4 HDMI Control 4 When you finish with the setting, press [SETUP] to exit. 1 Format (Default : RGB) You can select the color space for HDMI output. 112 EN Set the appropriate color space for your display device. Use [K / L] to select a setting, then press [OK]. • When the connected device is not compatible with the Y/ Cb/Cr, HDMI signal is output as RGB regardless of the setting. Format RGB YCbCr Your setting will be activated. 2 HDMI Audio (Default : ON) If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUTPUT jack to your audio system, etc.), you can set the HDMI audio output off. Use [K / L] to select a setting, then press [OK]. • Set to "OFF" when the HDMI sound is not output. HDMI Audio ON OFF Your setting will be activated. 3 RGB Range (Default : Normal) You can adjust the RGB range to make the dark areas of the HDMI images brighter. Use [K / L] to select a setting, then press [OK]. • Select "Enhanced" if the black-white contrast is not clear. • This setting is effective only for HDMI RGB output. RGB Range Normal Enhanced Your setting will be activated. 4 HDMI Control (Default : OFF) HDMI Control ON OFF HDMI control allows integrated system control over HDMI and is part of the HDMI standard. When "HDMI Control" setting is set to "ON", functions listed below will be available. One Touch Play When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected automatically. The appropriate external input channel can also be selected on your TV automatically, when you press [PLAY B], [G], [H,], [DISC MENU], [TIMER], [DTV/TV], [SETUP], [CHANNEL / ], [the Number buttons] or [D. DUBBING] when the unit's power is on. Standby When you press and hold [STANDBY-ON y] for 2 seconds, it turns off the power to the standby mode of the TV first and then turns the power of this unit also. System Information Get & Set Menu Language This unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.