Magnavox MDV3110 User manual, English (US) - Page 8

Connection to an Audio System Audio Analog Audio Connection stereo system analog audio input jacks L R This unit audio cable AUDIO OUT L R AUDIO OUT Supplied cables used in this connection are as follows: • audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store. Rear Terminals 1 23 4 5 Digital Audio Connection Dolby Digital decoder, MD deck or DAT deck COAXIAL digital audio input jack digital audio coaxial cable DIGITAL AUDIO OUT Connection Setting Setup > Audio> Digital Out Connecting to a Dolby Digital decoder for Dolby Digital audio output. Bitstream Connecting to the other device (an MD deck or DAT deck etc.) without Dolby Digital decoder. LPCM * To complete these settings, refer to pages 15,17. Note: • The audio source on a disc in a Dolby Digital multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi-channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. • "Digital Out" setting is not available while HDMI audio is output. SETUP 6 1 HDMI OUT jack Use to connect a TV with an HDMI compatible port with an HDMI cable. 2 DIGITAL AUDIO OUT COAXIAL jack Connect a digital audio coaxial cable here through the digital audio coaxial input jack of a decoder or audio receiver. 3 AUDIO OUT jacks Connect an audio cable here through the audio input jacks of a television or other audio device. 4 COMPONENT VIDEO OUT jacks Connect a component video cable here through the component video input jacks of a television. 5 S-VIDEO OUT jack Connect an S-video cable here through the S-video input jack of a television. 6 VIDEO OUT jack Connect a video cable here through the video input jack of a television. EN - 8 -