Magnavox MDV560VR User manual, English (US) - Page 36
Troubleshooting Continued
View all Magnavox MDV560VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
English 36 Troubleshooting (Continued) Symptom Some channels are skipped over when using 3/4. Picture and sound of broadcasting channel are weak or missing. Cause " Those channels were deleted with the CH. ADD/DEL option. " Antenna or cables are loose. " Wrong TUNING BAND option is being used. Correction " Use CH. ADD/DEL. to restore channels. See "Channel Selection" on page 15. " Tighten connections or replace cable. " Try all TUNING BAND options. See "Channel Selection" on page 15 for details. Camcorder image is not " Camcorder is off. Ensure playback tape is shown. loaded properly. Camcorder image via A/V input to DVD+VCR is not " DVD+VCR SOURCE SELECT is not set to shown on TV screen. LINE1 or LINE2. " Turn camcorder on and press PLAY to operate properly. Re-check connections. " Press INPUT to select LINE input channel (LINE1 or LINE2). Timer recording is not possible. " Clock in DVD+VCR is not set to correct time. " Timer has been programmed incorrectly. " indicator does not appear on DVD+VCR after programming timer. indicator appears after " DVD+VCR is in Timer Recording mode. DVD+VCR is turned off. " Set clock to correct time. See "Setting the Clock" on page 16. " Reprogram Timer. See "Timer Recording" on pages 22 and 23. " Reprogram Timer. " This is the normal indication that the DVD+VCR is in TIMER mode. Stereo Audio Record and/or Playback is not present. The "PROGRESSIVE SCAN MODE" message remains on-screen. " TV is not Stereo-compatible. " No action is possible. " Broadcast program is not in stereo format. " No action is possible. " DVD+VCR A/V Out jacks are not connected to TV A/V In jacks. " DVD+VCR Audio/Video Out is not selected for viewing at the TV. " DVD+VCR BROADCAST TYPE mode is set to SAP or MONO. " DVD+VCR was turned 'ON' while setting the Progressive scan mode. " Make A/V connections. Stereo is available only via A/V output from DVD+VCR. " Select AUX or A/V source as TV input. " Set BROADCAST TYPE mode to STEREO. See "Setting the VCR Setup Menu" on page 15. " Press and hold the STOP button for more than 5 seconds to cancel Progressive mode setting. Moisture Condensation Moisture condensation can occur: In locations where moisture condensation may occur: • When the DVD+VCR is moved from a cold place to a warm place. • Under extremely humid conditions. • Keep the DVD+VCR plugged into an AC power outlet with POWER On. This will help prevent condensation. • When condensation has occurred, wait a few hours for the DVD+VCR to dry before using it.