Magnavox MG-MTPT1605 User Manual - Page 3

16.The heater must not be located immediately below a socket-outlet. 17.Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. 18.If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. FUNCTION DESCRIPTION A Operating-elements B Control lamp C Air outlet D Handle E Air inlet F Tip-over-switch G Connection cable Operating-elements TFH F15VVC(Fig. 4): (A) POWER OFF =OFF FAN= cold air LOW=750W HIGH=1500W (B) OSCILLATION OFF= NO OSCILLATION SWING= OSCILLATION (Fig. 4) Overheating safety device A thermal overload protector is built in to prevent overheating. When an overheat temperature is reached, the heater will be automatically shut off. It can only resume operation when the user resets the unit. If the heater does not switch on, the safety device has been activated. Remove the mains plug from the wall socket. Let the heater cool down for 30 minutes. Check if the