Magnavox MSB5660 Owners Manual - Page 11
USE YOUR SOUNDBAR, Turning On the Soundbar
View all Magnavox MSB5660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
USE YOUR SOUNDBAR Turning On the Soundbar 1 Press on the Remote Control or press on the Right side of the Main unit. or 2 Check PAIRING indicator on the rear of Subwoofer lights up and is solid. PAIRING indicator If the Main unit is not detecting the Subwoofer: 1 To activate the Pairing mode with the Subwoofer, press and hold flowing side to side. on the Remote Control until all LED indicators flash 2 Press and hold PAIRING button on the rear of Subwoofer until PAIRING indicator is blinking rapidly. 3 When pairing is completed, all LED indicators will blink once, then go back to light the current input. The PAIRING indicator on the Subwoofer stays light on. • If the PAIRING indicator on the rear of Subwoofer is still blinking even if you have made the procedures above, refer to "Troubleshooting Guide" on page 18. • You can also confirm by "Speaker check" to make sure the sounds are outputting from all speakers properly. (Refer to "Confirming the Sound Output from the Speakers" on page 14.) 3 Select INPUT source. e.g.) When was pressed. or • One of the INPUT indicators will light up when you switch to your connected source. • For Bluetooth connections, refer to "Playing back a music file through Bluetooth" on page 14. - 11 -