Magnavox MSB5660 Owners Manual - Page 17

Installing the Soundbar on a wall, optional

Page 17 highlights

Installing the Soundbar on a wall (optional) 1 Prepare the screws (x 2) as specified length below, then make the screw holes on the anterior wall. 0.14'' ~ 0.16'' (3.5~4mm) 0.16'' ( 4mm) >0.98'' ( 25mm) 2 Hang the Main unit over the screws. 27.6'' (700mm) ~0.2'' ( 5mm) ~0.35'' ( 9mm) 3 Prepare the screws (x 2) as specified length below, then make the screw holes on the rear wall. Then, hang the Satellite speakers over the screw. 0.14'' ~ 0.16'' (3.5~4mm) 0.16'' ( 4mm) >0.98'' ( 25mm) ~0.2'' ( 5mm) ~0.35'' ( 9mm) NOTE(S) Funai is not liable for these types of accidents or injury noted below. • Do not mount the Soundbar onto the wall while your Soundbar is plugged in or Turned On. It may result in an electrical shock injury. • Install the screws on a sturdy vertical wall. If installed onto a ceiling or slanted wall, the Soundbar may fall which could result in a severe injury. • Make sure that the wall where you are mounting the Soundbar is appropriate. Some mounts are not designed to be mounted to walls with steel studs or cinder block construction. If you are unsure, contact a professional installer. • Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside the Speaker. If screws too short are used this may cause the Speaker to fall. • Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to an injury. • Do not place any objects on the mounted Speakers. • Never allow children to climb on or play on the Soundbar. - 17 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

– 17 –
1
Prepare the screws (x 2) as specified length below, then make the screw holes on the anterior wall.
27.6’’
(700mm)
0.14’’ ~ 0.16’’
(3.5~4mm)
>0.98’’
(25mm)
0.16’’
(4mm)
2
Hang the Main unit over the screws.
~0.2’’
(5mm)
~0.35’’
(9mm)
3
Prepare the screws (x 2) as specified length below, then make the screw holes on the rear wall.
Then, hang the Satellite speakers over the screw.
~0.2’’
(5mm)
~0.35’’
(9mm)
0.14’’ ~ 0.16’’
(3.5~4mm)
>0.98’’
(25mm)
0.16’’
(4mm)
NOTE(S)
Funai is not liable for these types of accidents or injury noted below.
• Do not mount the Soundbar onto the wall while your Soundbar is plugged in or Turned On. It may result in an electrical shock injury.
• Install the screws on a sturdy vertical wall. If installed onto a ceiling or slanted wall, the Soundbar may fall which could result in a severe injury.
• Make sure that the wall where you are mounting the Soundbar is appropriate. Some mounts are not designed to be mounted to walls with steel
studs or cinder block construction. If you are unsure, contact a professional installer.
• Do not use screws that are longer or shorter than their speci
ed length. If screws too long are used this may cause mechanical or electrical damage
inside the Speaker. If screws too short are used this may cause the Speaker to fall.
• Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to an injury.
• Do not place any objects on the mounted Speakers.
• Never allow children to climb on or play on the Soundbar.
Installing the Soundbar on a wall
(optional)