Magnavox MVH-2000 / Owners manual - Page 11

OPERATING INSTRUCTIONS 1. Turn the heater on or off by pressing the Power button on the control panel (C) or by pressing 1 the ON/OFF button on the remote control (B). Once the power is off, heating elements will C B stop working first. The fan will continue work- ing for up to 90 seconds to dispense residual heat inside the heater. This is a normal func- tion. 2. Select a heat setting by pressing the HEAT button on either the control panel (C) or the remote control (B) to toggle between the three heat settings. Power for heat-up mode is 1,500 W; heat-down is 750 W. ECO mode is an Economic Energy Saving Function. When ECO mode is chosen, the heater will operate to maintain a constant warm 68°F 2 C HIGH LOW B ECO 3. Set the temperature by pressing the arrows on the control panel (C) or the remote control (B). 3 You can set the temperature on the heater anywhere between 50°F and 90°F or between C 10°C and 32°C. Once you have chosen the de- sired temperature, the heater will remain on until the room temperature increases to the temperature on the digital display. The heat- B er will cycle on and off to maintain the desired room temperature. To view the ambient temperature press the ambient temperature button on the control panel. Note: To switch between Fahrenheit and OR Celsius, press and hold the ambient temperature button on the control panel (C) for 5 seconds. On the remote (B), short press the ambient temperature button to switch between Fahrenheit and Celsius, long press for 3 seconds to engage child lock. C B 11