Magnavox VRC602MG User manual, English (US) - Page 27

Recording 27 Read and follow the steps below to record a television program. 1 Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to. 2 Insert a tape with its record tab intact in the VCR. If playback begins, press the VCR button, then press the STOP/p button to stop the tape. 3 If the VCR light appears on the display panel, go to step 4. If the VCR light does not appear, press the VCR button, then press the VCR/TV button once. 4 Press the VCR button, then press the SPEED button repeatedly until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 32.) 5 Use the CH(annel) o/p buttons or the Number buttons to select the channel you want to record. 6 Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear on the VCR display panel. 7 To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again. 8 To stop recording, press the STOP/p button. 1 Turn on the TV. 2 Insert a tape in the VCR. 5 3 4 EJECT MENU POWER STATUS/EXIT CLEAR 1 2 3 4 5 6 7 8 9 MEMORY ALT.CH 0 REC PAUSE /OTR /STILL PLAY REW F.FWD STOP CH. VCR VOL. MUTE TV CBL/DBS VCR/TV SPEED TIME SEARCH ENTER SLOW 6 7 8 Helpful Hints • If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. • If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. • Other recording options are on pages 28-34. • You can change the tape speed during a recording, but some distortion will appear on the tape. • The VCR will record in a preset volume.