Makita 1002BA Owners Manual

Makita 1002BA Manual

Get Makita 1002BA PDF manuals and user guides View all Makita 1002BA manuals
Add to My Manuals
Save this manual to your list of manuals

Makita 1002BA manual content summary:

  • Makita 1002BA | Owners Manual - Page 1
    Curved Planer 1I O mm (4-3/8") MODEL 1002BA INSTRUCTION MANUAL Planing width 110 mm (4-3/8") Planing depth 4 mm (5/32") No load speed (RPM) 15,000 Overall length 339 mm (13-1/32") Net weight 5 4 kg (11 9 Ibs)
  • Makita 1002BA | Owners Manual - Page 2
    logs. 7. DRESSPROPERLY. Don't wear looseclothing or jewelry. They can becaught in moving parts safer than using your hand and itfrees both hands t o operate tool. instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service
  • Makita 1002BA | Owners Manual - Page 3
    that may affect its operation. A guard or other part that isdamagedshould be properly repairedor replacedby an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service center. Don't use tool if switch does not
  • Makita 1002BA | Owners Manual - Page 4
    . Do not leave the tool running. Operate the tool only when hand-held. 14. When leaving the planer, switch off and set it with the front base up on a wooden block, so that the blades do not contact anything. 15. Always change both blades or covers on the drum, otherwise the resulting imbalance will
  • Makita 1002BA | Owners Manual - Page 5
    planer blades CAUTION: Always be sure that the tool is switched off and unplugged before removing or installing the blade. To remove the blades on the drum, unscrew the four installation bolts with the socket wrench. The drum cover comes off together with the blades. \ I To install the blades
  • Makita 1002BA | Owners Manual - Page 6
    Adjusting depth of cut Depth of cut may be adjusted by simply turning the knob on the front of the tool. Knob Adjusting front base The front base is factory-adjusted to allow concave cuts with a radius of 320 mm. For concave cuts with the tool's minimum radius of 300 mm, loosen the wing bolt on
  • Makita 1002BA | Owners Manual - Page 7
    Sharpening planer blades Always keep your blades sharp for the best performance possible. Use the sharpening holder to remove nicks and produce a fine edge. Sharpening holder First, loosen the two wing nuts on the holder and insert the blades (A) and (B), so that they contact the sides (C) and
  • Makita 1002BA | Owners Manual - Page 8
    the brush holder caps. Sdrewdriver Chipcover I Brush holder cap \ To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 8
  • Makita 1002BA | Owners Manual - Page 9
    with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of injury to persons The accessories or attachments should be used only in the proper and intended manner Planer blade Width 110 mm (4-3/8") Part No 793008-8 Planer blade (Material
  • Makita 1002BA | Owners Manual - Page 10
    110 mm (4-318") CURVED PLANER Model 1002BA Seo.-ll-'97 US e Note: The switch and other part configurations may differ from country to country. 10
  • Makita 1002BA | Owners Manual - Page 11
    MODEL 1002BA ,&, Belt cover Ball Bearing 6200LB Insulation Washer ARMATURE ASSEMBLY (With Item 34. 35, 36 & 39) Flat Washer 12 Ball Bearing 6ZOlDDW Rubber Pin 6 Pan Head Screw M5x65 Rubber Pin 4 FIELD ASSEMBLY Hex Flange Head Bolt M6x17 Drum Plate Pan Head Screw M4x5 Adjusting Plate Planer Blade
  • Makita 1002BA | Owners Manual - Page 12
    during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This Warranty does not
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Curved
Planer
Planing width
110
mm
(4-3/8")
1
I O
mm
(4-3/8")
MODEL
1002BA
Planing depth
No
load
speed
Overall length
Net weight
4
mm
(5/32")
15,000
339
mm
(13-1/32")
5
4 kg (1
1
9 Ibs)
(RPM)
INSTRUCTION MANUAL