Makita 9558HP Instruction Manual - Page 6

FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock 1 To prevent the switch lever from accidentally pulled, a lock-off lever is provided. To start the tool, pull the lockoff lever toward the operator and then pull the switch trigger. Release the switch lever to stop. For continuous operation, pull the switch lever and then push in the lock button. To stop the tool from the locked position, pull the switch lever fully, then release it. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing side grip (handle) ► 1 . Shaft lock CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged. Press the shaft lock to prevent spindle rotation when installing or removing accessories. Switch action CAUTION: • Always be sure that the side grip is installed securely before operation. Screw the side grip securely on the position of the tool as shown in the figure. Installing or removing wheel guard 1 1 2 3 2 ► 1 . Lock-off lever 2. Switch lever 3. Lock button CAUTION: 3 • Before plugging in the tool, always check to see that the switch lever actuates properly and returns to the "OFF" position when released. ► 1 . Wheel guard 2. Bearing box 3. Screw • Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool. • Do not pull the switch lever forcibly without pushing in the lock-off lever. 6 ENGLISH