Makita 9566PC Owners Manual - Page 2

ENGLISH SPECIFICATIONS Depressed center wheel diameter Spindle thread 115 mm M14 125 mm M14 150 mm M14 No load speed (no) / Rated speed (n) Overall length 9564PC 9565PC 11,500 307 mm 9566PC 10,000 307 mm 9564PCV 9565PCV 2,800 - 11,500 307 mm 9566PCV 4,000 - 10,000 307 mm Net weight 1.9 kg 1.9 kg 1.9 kg 1.9 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. END202-4 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Wear safety glasses. ･ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE048-1 Intended use The tool is intended for grinding, sanding and cutting of metal and stone materials without the use of water. ENF002-1 Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. For Model 9564PC,9564PCV ENG101-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-3: Sound pressure level (LpA) : 81 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 85 dB (A). Wear ear protection. ENG208-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-3: Work mode : surface grinding Vibration emission (ah,AG) : 10 m/s2 Uncertainty (K) : 1.5 m/s2 For Model 9565PC,9565PCV ENG101-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-3: Sound pressure level (LpA) : 82 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 85 dB (A). Wear ear protection. ENG208-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-3: Work mode : surface grinding Vibration emission (ah,AG) : 10 m/s2 Uncertainty (K) : 1.5 m/s2 For Model 9566PC,9566PCV ENG101-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-3: Sound pressure level (LpA) : 84 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 85 dB (A). Wear ear protection. ENG208-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-3: Work mode : surface grinding Vibration emission (ah,AG) : 8.5 m/s2 Uncertainty (K) : 1.5 m/s2 2