Makita 9820-2 Owners Manual - Page 8
Adjusting sharpening holder - - horizontal wheel sharpener
 |
View all Makita 9820-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
The nut for raising or lowering the pole on either side raises the pole 0.5 mm (1/32") for each graduation, when turned clockwise, and it lowers the pole, conversely, 0.5 mm (1/32") when turned counterclockwise. Tilt the sharpening platform guide slightly with right side downward so that the blade contacts the right side surface of the grinding wheel. Adjusting sharpening holder I The sharpening holder horizontal (forward) adjust screws should be unscrewedto allow the heel of the blade to be inserted so as to contact the blade fastening screws. Then lightly tighten the blade fastening screws and set the holder on the platform. - Blade I \ Forward adiurt screw I I I \ 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
 |
 |
The nut for raising or lowering the pole on
either side raises the pole
0.5
mm
(1/32")
for each graduation, when turned clock-
wise, and
it
lowers the pole, conversely,
0.5
mm
(1/32")
when turned counterclock-
wise.
Tilt the sharpening platform guide slightly
with right side downward
so
that the blade
contacts the right side surface of the grind-
ing wheel.
Adjusting sharpening holder
The sharpening holder horizontal (forward)
adjust screws should be unscrewed to allow
the heel of the blade to be inserted
so
as
to
contact the blade fastening screws. Then
lightly tighten the blade fastening screws
and
set
the holder on the platform.
I
Blade
-
I
Forward adiurt screw
\
I
\
I
I
8