Makita AC001GZ Instruction Manual - Page 7

Introduction

Get Makita AC001GZ PDF manuals and user guides View all Makita AC001GZ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery cartridge cool down before charging it. 4. When not using the battery cartridge, remove it from the tool or the charger. 5. Charge the battery cartridge if you do not use it for a long period (more than six months). Parts description INTRODUCTION General information This air compressor is equipped with an Oil-Less pump designed for durability and no maintenance. The compressor can be used for properly rated pneumatic nailers and staplers. An air pressure regulator is supplied for these applications. Intended use This air compressor is designed for professional finish nailing and stapling applications. WARNING: Never use compressor for applications other than to operate a properly rated nailer or stapler. Use of the compressor for other applications could result in property damage and personal injury. Separate air transformers which combine the functions of air regulation and/or moisture and dirt removal should be used where applicable. WARNING: Use the pressure gauge only for a reference. Check the air pressure using calibrated measuring equipment during and after inflating objects. 3 2 1 4 5 6 7 8 9 10 Fig.1 12 11 1 Air filter (air intake) 5 Regulator 9 Tank pressure gauge 2 Battery cartridge 6 Outlet pressure gauge 10 Safety valve 3 Carrying handle 7 Air outlet (NPT 1/4) 11 Drain valve 4 On/Auto-Off switch 8 Quick coupler (country specific) 12 Air tank CAUTION: Always use accessories and attachments recommended for use with Makita product. Not doing so may cause personal injury. Accessories and attachments must be used for its original purpose. If you need any assistance, ask your local Makita Service Center. 7 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
7
ENGLISH
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4.
When not using the battery cartridge, remove
it from the tool or the charger.
5.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
INTRODUCTION
General information
This air compressor is equipped with an Oil-Less pump
designed for durability and no maintenance.
The compressor can be used for properly rated pneu-
matic nailers and staplers. An air pressure regulator is
supplied for these applications.
Intended use
This air compressor is designed for professional finish
nailing and stapling applications.
WARNING:
Never use compressor for appli-
cations other than to operate a properly rated
nailer or stapler.
Use of the compressor for other
applications could result in property damage and
personal injury.
Separate air transformers which combine the
functions of air regulation and/or moisture and dirt
removal should be used where applicable.
WARNING:
Use the pressure gauge only for a
reference. Check the air pressure using calibrated
measuring equipment during and after inflating
objects.
Parts description
1
2
3
4
5
6
7
8
9
10
11
12
Fig.1
1
Air filter (air intake)
2
Battery cartridge
3
Carrying handle
4
On/Auto-Off switch
5
Regulator
6
Outlet pressure gauge
7
Air outlet (NPT 1/4)
8
Quick coupler (country
specific)
9
Tank pressure gauge
10
Safety valve
11
Drain valve
12
Air tank
CAUTION:
Always use accessories and attachments recommended for use with Makita product. Not
doing so may cause personal injury. Accessories and attachments must be used for its original purpose. If
you need any assistance, ask your local Makita Service Center.