Makita AN923 Owners Manual - Page 5
Functional Description, Assembly - nailer
View all Makita AN923 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
FUNCTIONAL DESCRIPTION ASSEMBLY CAUTION: • Always lock the trigger and disconnect the hose before adjusting or checking function on the tool. 007006 1. Adjuster A CAUTION: • Always lock the trigger and disconnect the hose before carrying out any work on the tool. Loading nailer 007007 B 1 To adjust the depth of nailing, turn the adjuster. The depth of nailing is the deepest when the adjuster is turned fully in the A direction shown in the figure. It will become shallower as the adjuster is turned in the B direction. If nails cannot be driven deep enough even when the adjuster is turned fully in the A direction, increase the air pressure. If nails are driven too deep even when the adjuster is turned fully in the B direction, decrease the air pressure. Generally speaking, the tool service life will be longer when the tool is used with lower air pressure and the adjuster set to a lower depth of nail driving. Hook 1 007062 1. Hook Select nails suitable for your work. Insert strip of nails into the magazine. Pull the pusher lever to the rear to engage the pusher to the last nail. 007008 1. Pusher 1 Unloading nailer 007009 1 1. Pusher lever 2. Depress 3. Return CAUTION: • Always lock the trigger and disconnect the hose from the tool. • Never hook the tool at high location or on potentially unstable surface. The hook is convenient for hanging the tool temporarily. To use the hook, simply lift up hook until it snaps into the open position. When not in use, always lower hook until it snaps into the closed position. 3 2 Pull the pusher lever to the rear. Return the pusher lever back while keeping the pusher depressed to disengage it from the strip of nails. Depress the nail stopper and remove the strip of nails from the magazine. 5