Makita AN923 Owners Manual - Page 7
Maintenance
View all Makita AN923 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CAUTION: • Always lock the trigger, disconnect the hose and remove the nails from the magazine before cleaning a jam. When the nailer becomes jammed, do as follows: Insert a small rod or the like into the ejection port and tap it with a hammer to retract the driver. Use pliers to bend the jammed nail so that the nail head comes out of the slot in the driver guide. Then remove the jammed nail. 004309 1. Pliers 2. Slot 1 2 Maintenance of nailer Always check the tool for its overall condition and loose screws before operation. Tighten as required. 007015 With tool disconnected, make daily inspection to assure free movement of the contact element and trigger. Do not use tool if the contact element or trigger sticks or binds. 007016 Nails 004310 Make sure that the trigger is locked when the change lever is set to the position. 007017 1. Trigger lock 2. Change lever Handle nail coils and their box carefully. If the nail coils have been handled roughly, they may be out of shape or their connector breaks, causing poor nail feed. Avoid storing nails in a very humid or hot place or place exposed to direct sunlight. 004311 1 2 When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or humid or hot environment. 007018 MAINTENANCE CAUTION: • Always disconnect the air hose from the tool before attempting to perform inspection or maintenance. 7