Makita BTD141 Owners Manual - Page 2

ENGLISH SPECIFICATIONS Model BTD130F BTD140 BTD141 Machine screw 4 mm - 8 mm Capacities Standard bolt 5 mm - 14 mm High tensile bolt No load speed (min-1) 0 - 2,400 5 mm - 12 mm 0 - 2,300 Impacts per minute 0 - 3,200 Overall length 146 mm 145 mm Net weight 1.4 kg 1.5 kg Rated voltage D.C.14.4 V D.C.18 V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. END004-2 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual. ･ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE033-1 Intended use The tool is intended for screw driving in wood, metal and plastic. For Model BTD130F ENG102-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-2: Sound pressure level (LpA) : 90 dB(A) Sound power level (LWA) : 101 dB(A) Uncertainty (K) : 3 dB(A) Wear ear protection ENG205-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-2: Work mode : impact tightening of fasteners of the maximum capacity of the tool Vibration emission (ah) : 14 m/s2 Uncertainty (K) : 1.5 m/s2 For Model BTD140,BTD141 ENG102-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-2: Sound pressure level (LpA) : 90 dB(A) Sound power level (LWA) : 101 dB(A) Uncertainty (K) : 3 dB(A) Wear ear protection ENG205-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-2: Work mode : impact tightening of fasteners of the maximum capacity of the tool Vibration emission (ah) : 17 m/s2 Uncertainty (K) : 1.5 m/s2 ENH102-7 EC-DECLARATION OF CONFORMITY Model; BTD130F,BTD140,BTD141 We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents; EN60745, EN55014 in accordance with Council Directives, 2004/108/EC, 98/37/EC. CE2007 000230 Tomoyasu Kato Director Responsible Manufacturer: Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN Authorized Representative in Europe: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND 2