Makita DA4000LR Owners Manual - Page 8
Installing or removing angle attachment - angle drill
View all Makita DA4000LR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
003044 Use of it with angle attachment Screw the side grip for the angle attachment on the angle housing. Then tighten the side grip by turning clockwise at the desired position. 003045 Use of it without angle attachment Screw the side grip on the tool barrel securely. The side grip can be installed on either side of the tool, whichever is convenient. 1 1. High 2. Low 1 1. Chuck key 2. Drill chuck 003066 2 Installing or removing angle attachment The angle head has a spindle on each end. For higher speed operation, attach the drill chuck to the end marked "HIGH". The higher speed is better suited for drilling smaller diameter holes. For lower speed operation, attach the drill chuck to the end marked "LOW". The lower speed is best utilized for drilling larger diameter holes. 003067 The tool is factory assembled with the chuck on spindle end marked "HIGH". To change to the "LOW" speed, proceed as follows: To remove the drill chuck, first open the chuck jaws completely and place the chuck key in one of the key holes. 2 8