Makita DCF203Z DCF203 Instruction Manual - Page 7

Adjusting fan head angle The angle of the fan head can be adjusted manually. The adjustable range of the fan head is as shown in the figure. 90˃ 90˃ 90˃ 45˃ NOTICE: Do not turn the fan head beyond the adjustable range. Oscillating the fan head CAUTION: When oscillating the fan head, keep obstacles clear of the moving range of the fan head. The cordless fan may be pushed and fall by the oscillation. CAUTION: Do not stop the oscillation by holding the fan head. Always press the oscillation button to stop. Press the oscillation button to oscillate the fan head. Press the button again to stop the oscillation. The fan head begins to oscillate from the current position when the oscillation button is pressed. The fan head oscillates in the range of 90-degrees. NOTE: Depending on the fan head position, the fan head may not oscillate soon after the oscillation button is pressed because of the oscillation mechanism. Auto-off timer Press the auto-off timer button while the fan is running. The duration to activate auto-off timer changes every time you press the button (1 hour / 2 hours / 4 hours / off). The number under each auto-off timer indicator shows the remaining hour(s) to turn off the fan. The auto-off timer indicator will turn off with time. 1 1 ► 1 . Oscillation button ► 1 . Auto-off timer button NOTE: Depending on the battery cartridge type and its remaining capacity, the auto-off timer may be activated earlier than the set time. 7 ENGLISH