Makita DCF203Z DCF203 Instruction Manual - Page 8
Maintenance
View all Makita DCF203Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Using AC adaptor WARNING: Never use the appliance when the cord or plug is damaged. WARNING: Do not handle the plug with wet or greasy hand. WARNING: Do not leave the AC adaptor disconnected from the appliance while the power is supplied from the mains. Small children may put the live plug in their mouth and cause injury. WARNING: Do not put the live plug or cord into your mouth. Doing so might cause an electric shock. Insert the 15V DC plug of AC adaptor into the 15V DC socket, and then plug the AC pins into a main power supply. Make sure that the voltage rating of the main power supply corresponds with that of the adaptor. General maintenance After the appliance is cooled, use clean clothes to remove dirt, dust, oil, grease etc. WARNING: All parts should be replaced at an Authorized Service Center. Fan Cleaning CAUTION: Ensure that the fan is switched off from the supply mains before removing the guard. When cleaning the inside of fan-cover, remove the fancover by following way. 1. Loosen the screw located on the back of the fan-cover. 1 NOTE: After the AC adaptor is connected, the appliance may take 3-5 seconds to start. NOTE: The adaptor might creak while using it for the power supply. This doesn't affect normal use. NOTE: Even operating in DC power mode, the appliance is automatically changed into AC power mode when plugged in. NOTE: When the cordless fan switches the power mode from DC to AC, and vice versa, the wind speed may change temporarily. NOTE: The AC adaptor does not charge the battery inserted to the appliance. ► 1 . Screw 2. Turn the fan-cover counterclockwise, and remove the fan-cover when the markings are aligned as illustrated. 1 MAINTENANCE ► 1 . Marking CAUTION: Always be sure that the appliance is switched off, unplugged, and the battery cartridge is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 8 ENGLISH