Makita DCJ205ZL DCJ205Z DCJ206Z Instruction Manual - Page 9
Parts Description, Installation
View all Makita DCJ205ZL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PARTS DESCRIPTION Battery holder (optional accessory) ► Fig.1 1 Battery holder (10.8 V 12 V max) Model CJ105D / DCJ205 ► Fig.2 2 Battery holder (14.4 V / 18 V) 1 Power button Model CJ106D / DCJ206 ► Fig.3 2 Battery pocket 1 Power button 5 Hood Model CV102D / DCV202 ► Fig.4 2 Battery pocket 6 Name tag holder 1 Power button 2 Battery pocket 3 Belt hook 3 Jack 3 Jack -3 Jack 4 Strap hole 4 Code lock 4 Code lock -- INSTALLATION Installing or removing the battery cartridge CAUTION: Always switch off the device before installing or removing the battery cartridge. CAUTION: Hold the battery holder and the battery cartridge firmly when installing or removing the battery cartridge. Failure to hold the battery holder and the battery cartridge firmly may cause them to slip out of your hands and result in damage to the battery holder and battery cartridge and/or a personal injury. ► Fig.5: 1 . Red indicator 2. Button 3. Battery cartridge 4. Battery holder (optional accessory) To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert the battery cartridge all the way until it locks in place with a small click. If you can see the red indicator on the upper side of the button, it is not locked completely. To remove the battery cartridge, slide it from the battery holder while pressing the button on the front of the cartridge. CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. Otherwise the battery cartridge may accidentally fall out of the battery holder, causing injury to you or someone around you. CAUTION: Do not forcibly install the battery cartridge. If the battery cartridge does not slide in easily, it is not being inserted correctly. Battery pocket The battery holder (with battery cartridge) can be stored in the battery pocket. Connect the power cable jack pulled out of the battery pocket to the battery holder plug. Then put the battery holder into the battery pocket and fasten the fastener. ► Fig.6: 1 . Power cable 2. Jack 3. Plug 4. Battery pocket The belt hook on the battery holder can be detached by removing the screws. ► Fig.7: 1 . Screw 2. Belt hook Attaching the battery holder You can hang the battery holder on your waist belt. To prevent the battery holder from dropping accidentally, attach a strap using the strap hole and secure it. 1. Pull the power cable out of the upper hole in the battery pocket and feed the jack through the lower hole in the battery pocket and pull it through to the inside of the jacket or vest. ► Fig.8: 1 . Power cable 2. Upper hole 3. Battery pocket 4. Jack 5. Lower hole 2. Attach the belt hook of the battery holder to your waist belt, and connect the jack to the battery holder plug. ► Fig.9: 1 . Belt hook 2. Battery holder 3. Waist belt 4. Plug 5. Jack The battery holder has an anti-drop function. When removing the battery holder from the belt, pull up the battery holder while pressing the unlock button. ► Fig.10: 1 . Unlock button 9 ENGLISH