Makita DCL501Z DCL501 Instruction Manual - Page 7

1. Shoulder belt OPERATION Switch action 1. ON (2/1) button 2. OFF (0) button 1 1 2 Pull the ends of the belt up so that they are at least 80 mm (3") from the top of the stopper. 80 mm Attach the hose hook at around the midpoint along the hose. Store the shoulder belt in the hose hook when not using it. 1. Hose hook 1 1. Shoulder belt 1 2. Hose hook 2 To start the cleaner, simply press the ON (2/1) button. To switch off, press the OFF (0) button. To change the cleaner speed, press the ON (2/1) button. The first press on this button is for high speed and the second press for low speed. Each press on this button repeats the speed change alternatively. Indicator lamps The indicator lamps light up or flash to indicate the status of the appliance. 1. Filter indicator 1 (orange lamp) 2. Battery indicator (red lamp) 2 Filter indicator (orange lamp) Lighting on The filter is dirty. Clean the filter. Refer to Section "Cleaning the filter (after work)". Blinking rapidly The filter is clogged with dust. Wash the filter. Refer to Section "Cleaning the filter (thoroughly cleaning)". Battery indicator (red lamp) Blinking Lighting on The battery power is getting low. The battery is very low and the appliance will stop. Charge the battery. NOTE: • Always remove dust frequently. Suction power will be reduced if there is too much dust in cleaner. 7