Makita DML815 DML815 Instruction Manual - Page 2
Specifications, Safety Warnings
View all Makita DML815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ENGLISH (Original instructions) SPECIFICATIONS Model: LED Dimensions (L x W x H) DML815 0.5 W x 4 227 mm x 79 mm x 116 mm (8-15/16″ x 3-1/8″ x 4-9/16″) Rated voltage D.C. 14.4/18 V Net weight 0.56 - 0.93 kg (1.23 - 2.05 lbs) • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi- est combination, according to EPTA-Procedure 01/2014, are shown in the table. Applicable battery cartridge BL1430B / BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B • Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. Operating time Battery cartridge Operating time BL1430B 17 hours BL1815N 13.5 hours BL1820B 18 hours BL1830 / BL1830B 24.5 hours BL1840B 35 hours BL1850B 45 hours BL1860B 54 hours • The operating times in the above table are a rough guideline. They may differ from actual operating times. • Operating times may differ depending on battery type, charging status, and usage condition. • Battery cartridge may differ from country to country. SAFETY WARNINGS IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS. 1. Do not look into the light, or do not expose the light to eyes. Eyes may be damaged. 2. Do not cover or clog the lit tool with cloth or carton, etc. Covering or clogging it may cause a flame. 3. The tool is not waterproof. Do not use it in damp or wet locations. Do not expose it to rain or snow. Do not wash it in water. 4. Do not touch the inside of the flashlight head with tweezers, metal tools, etc. 5. Do not give the tool a shock by dropping, striking, etc. 6. When the tool is not in use, always switch off and remove the battery cartridge from the tool. 7. Battery tool use and care • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the machine. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. • Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing machine. Such preventive safety measures reduce the risk of starting the appliance accidentally. • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. • Use appliance only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. 2 ENGLISH