Makita DML815 DML815 Instruction Manual - Page 5
Indicating the remaining battery, capacity, Lighting up the light, Battery protection system, Head
View all Makita DML815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Indicating the remaining battery capacity Only for battery cartridges with the indicator 1 Lighting up the light CAUTION: Do not look in the light or see the source of light directly. Push the power button to light up the light. To turn off the light, push the power button again. 2 ► 1 . Indicator lamps 2. Check button Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for a few seconds. Indicator lamps Remaining capacity Lighted Off Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. The battery may have malfunctioned. 1 ► 1 . Power button Battery protection system The tool is equipped with the protection system, which automatically cuts off the output power for long service life. The light goes off during operation when the remaining battery capacity gets low. This is caused by the activation of the protection system and does not show trouble. Remove the battery cartridge from the tool and charge it. Head angle CAUTION: When changing the head angle, be careful not to pinch your fingers between the head and the tool body. The head angle can be adjusted in 12 stages. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. 5 ENGLISH