Makita FD07R1 FD07 Instruction Manual - Page 9

Using the tool as a hand screwdriver Switch off the tool. Move the reversing switch lever to the neutral position. Turn the adjusting ring so that the arrow points to the marking. Turn the tool. NOTE: This use is convenient for checking the screwdriving. NOTE: Do not use the tool for work requiring excessive force, such as tightening bolt or removing rusted screws. Using holster Optional accessory CAUTION: When using the holster, remove a driver bit/drill bit from the tool. CAUTION: Turn off the tool and wait until it comes to a complete stop before placing it in the holster. Be sure to close the holster securely with the holster button so that it holds the tool firmly. 1. Thread a waist belt or similar through holster holder. 1 2 You can keep two driver bits at the front of the holster. MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES ► 1 . Holster holder 2. Waist belt 2. Put the tool in the holster and lock it with the holster button. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Drill bits 9 ENGLISH