Makita FS6200TP Owners Manual - Page 6
Operation, Maintenance, Accessories
View all Makita FS6200TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installing or removing the bit To remove the bit, first remove the locator by pulling the lock ring away from the gear housing.. 1. Lock ring 2. Gear housing OPERATION 1 2 009964 Grasp the bit with a pair of pliers and pull the bit out of the magnetic bit holder. Sometimes, it helps to wiggle the bit with the pliers as you pull. To install the bit, push it firmly into the magnetic bit holder. Then install the locator by pushing it firmly back onto the gear housing. 1 1. Locator 2. Bit 3. Gear housing 4. Magnetic bit holder 4 23 010095 Use of locator holder 1. Swells 2. Trapezoidal holes 3. Locator holder 1 2 3 009971 The locator can be temporarily held on the locator holder during replacing bit or using without locator. To hold the locator, position the trapezoidal holes of the locator on the swells of the locator holder and push it in. 009966 Fit the screw on the point of the bit and place the point of the screw on the surface of the workpiece to be fastened. Apply pressure to the tool and start it. Withdraw the tool as soon as the clutch cuts in. Then release the switch trigger. CAUTION: • When fitting the screw onto the point of the bit, be careful not to push in on the screw. If the screw is pushed in, the clutch will engage and the screw will rotate suddenly. This could damage a workpiece or cause an injury. • Make sure that the bit is inserted straight in the screw head, or the screw and/or bit may be damaged. • Hold the tool only by the handle when performing an operation. Do not touch the metal part. MAINTENANCE CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. 6