Makita GA7911 Owners Manual - Page 9
Installing or removing wheel guard, Installing or removing depressed center grinding, wheel/Multi- - brushes
View all Makita GA7911 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
• Guard assembly Part No. 191214-3 ... For 180 mm (7") Part No. 191215-1 ... For 230 mm (9") Guard accessory kit Part No. 191228-2 ... For 180 mm (7") Part No. 191231-3 ... For 230 mm (9") 1 1. Wheel guard 2. Bearing box 3. Screw 001066 Installing or removing wheel guard CAUTION: • When using a depressed center grinding wheel/Multi- disc, flex wheel or wire wheel brush, the wheel guard 23 must be fitted on the tool so that the closed side of the guard always points toward the operator. Mount the wheel guard with the protrusion on the wheel guard band aligned with the groove on the bearing box. Be sure to tighten both screws securely. To remove wheel guard, follow the installation procedure in reverse. 001078 1 2 3 1. Lock nut 2. Depressed center grinding wheel/ Multi-disc 3. Inner flange Installing or removing depressed center grinding wheel/Multi-disc (optional accessory) WARNING: • Always use optional guard when depressed center grinding wheel/Multi-disc is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury. Mount the inner flange onto the spindle. Fit the wheel on the inner flange and screw the lock nut onto the spindle. 001091 To tighten the lock nut, press the shaft lock firmly so that the 1 spindle cannot revolve, then use the lock nut wrench and securely tighten clockwise. To remove the wheel, follow the installation procedure in reverse. 2 1. Lock nut wrench 2. Shaft lock 9