Makita HR2651 HR2651/HR2661 Instruction Manual - Page 5
For HR2650/HR2651/HR2651T, For HR2661, For HR2651T, Removing the quick change chuck, for SDS-plus,
View all Makita HR2651 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Reversing switch action CAUTION: Always check the direction of rotation before operation. NOTICE: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. NOTICE: If the switch trigger cannot be depressed, check to see that the reversing switch is fully set to position / (A side) or / (B side). For HR2650/HR2651/HR2651T This tool has a reversing switch to change the direction of rotation. Move the reversing switch lever to the position (A side) for clockwise rotation or to the position (B side) for counterclockwise rotation. 1 B Changing the quick change chuck for SDS-plus For HR2651T The quick change chuck for SDS-plus can be easily exchanged for the quick change drill chuck. Removing the quick change chuck for SDS-plus CAUTION: Before removing the quick change chuck for SDS-plus, be sure to remove the bit. Grasp the change cover of the quick change chuck for SDS-plus and turn in the direction of the arrow until the change cover line moves from the symbol to the symbol. Pull forcefully in the direction of the arrow. 1 2 A ► 1 . Reversing switch lever For HR2661 This tool has a reversing switch to change the direction of rotation. Move the reversing switch lever to the position (A side) for clockwise rotation or the position (B side) for counterclockwise rotation. 1 1 A B 3 ► 1 . Quick change chuck for SDS-plus 2. Change cover 3. Change cover line Installing the quick change drill chuck Check the line of the quick change drill chuck shows the symbol. Grasp the change cover of the quick change drill chuck and set the line to the symbol. Place the quick change drill chuck on the spindle of the tool. Grasp the change cover of the quick change drill chuck and turn the change cover line to the symbol until a click can clearly be heard. 1 2 ► 1 . Reversing switch lever NOTE: When you operate the tool in counterclockwise rotation, the switch trigger is pulled only halfway and the tool runs at half speed. For counterclockwise rotation, you cannot push in the lock button. 3 4 ► 1 . Quick change drill chuck 2. Spindle 3. Change cover line 4. Change cover 5 ENGLISH